Optimization of subtractive-transformative hybrid processes supported by the technological heredity concept

This paper presents the optimization procedure of a hybrid removal-forming type process based on the minimum energy consumption and demanded surface roughness which is supported by the analysis of transformation of the surface and sublayer properties termed as the technological heredity. The experimental investigation covers an alloy steel hardened to 35 HRC and 55 HRC which was initially turned using coated carbide and CBN tools and subsequently burnished to produce surfaces with Ra roughness parameter of about 0.15 μm. The modifications of the initial surface profiles, microstructure and microhardness of the sublayer were determined and relevant technological limits are selected.     

Thioether Analogues of Disulfide‐Bridged Cyclic Peptides Targeting Death Receptor 5: Conformational Analysis,Dimerisation and Consequences for Receptor Activation

Cyclic peptides containing redox‐stable thioether bridges might provide a useful alternative to disulfide‐bridged bioactive peptides. We report the effect of replacing the disulfide bridge with a lanthionine linkage in a 16‐mer cyclic peptide that binds to death receptor 5 (DR5, TRAIL‐R2). Upon covalent oligomerisation, the disulfide‐bridged peptide has previously shown similar behaviour to that of TNF‐related apoptosis inducing ligand (TRAIL), by selectively triggering the DR5 cell death pathway. The structural and biological properties of the DR5‐binding peptide and its desulfurised analogue were compared. Surface plasmon resonance (SPR) data suggest that these peptides bind DR5 with comparable affinities. The same holds true for dimeric versions of these peptides: the thioether is able to induce DR5‐mediated apoptosis of BJAB lymphoma and tumorigenic BJELR cells, albeit to a slightly lower extent compared to its disulfide homologue. NMR analysis revealed subtle variation in the conformations of the two peptides and suggests that the thioether peptide is slightly less folded than its disulfide homologue. These observations could account for the different capability of the two dimers to cluster DR5 receptors on the cell surface and to trigger apoptosis. Nevertheless, our results suggest that the thioether peptide is a potential candidate for evaluation in animal models.     

The Tyrosine Gate of the Bacterial Lectin FimH: A Conformational Analysis by NMR Spectroscopy and X‐ray Crystallography

Urinary tract infections caused by uropathogenic E. coli are among the most prevalent infectious diseases. The mannose‐specific lectin FimH mediates the adhesion of the bacteria to the urothelium, thus enabling host cell invasion and recurrent infections. An attractive alternative to antibiotic treatment is the development of FimH antagonists that mimic the physiological ligand. A large variety of candidate drugs have been developed and characterized by means of in vitro studies and animal models. Here we present the X‐ray co‐crystal structures of FimH with members of four antagonist classes. In three of these cases no structural data had previously been available. We used NMR spectroscopy to characterize FimH–antagonist interactions further by chemical shift perturbation. The analysis allowed a clear determination of the conformation of the tyrosine gate motif that is crucial for the interaction with aglycone moieties and was not obvious from X‐ray structural data alone. Finally, ITC experiments provided insight into the thermodynamics of antagonist binding. In conjunction with the structural information from X‐ray and NMR experiments the results provide a mechanism for the often‐observed enthalpy–entropy compensation of FimH antagonists that plays a role in fine‐tuning of the interaction.     

Measuring errors and violations on the road: A bifactor modeling approach to the Driver Behavior Questionnaire

The Driver Behavior Questionnaire (DBQ) is a self-report measure of driving behavior that has been widely used over more than 20 years. Despite this wealth of evidence a number of questions remain, including understanding the correlation between its violations and errors sub-components, identifying how these components are related to crash involvement, and testing whether a DBQ based on a reduced number of items can be effective. We address these issues using a bifactor modeling approach to data drawn from the UK Cohort II longitudinal study of novice drivers. This dataset provides observations on 12,012 drivers with DBQ data collected at .5, 1, 2 and 3 years after passing their test. A bifactor model, including a general factor onto which all items loaded, and specific factors for ordinary violations, aggressive violations, slips and errors fitted the data better than correlated factors and second-order factor structures. A model based on only 12 items replicated this structure and produced factor scores that were highly correlated with the full model. The ordinary violations and general factor were significant independent predictors of crash involvement at 6 months after starting independent driving. The discussion considers the role of the general and specific factors in crash involvement.     

Changes in the state of heat-resistant steel induced by repeated hot deformation

This work deals with the problems of structural regeneration by thermal restoration treatment (TRT). These include the lack of a structural sign showing that TRT is possible, a consensus on TRT modes, the data on the necessary relaxation depth of residual stresses, or criteria of structural restoration. Performing a TRT without solving these problems may deteriorate the properties of steel or even accelerate its destruction. With this in view, the purpose of this work is to determine experimentally how the residual stress state changes under thermal and mechanical loads in order to specify the signs of the restoration of structure and structural stability. The object of this research is unused 12Cr1MoV steel that has been aged naturally for 13 years. Using X-ray dosimetry with X-ray spectral analysis, we study the distribution of internal residual stresses of the first kind during the repeated hot deformation. After repeated thermal deformation, the sample under study transforms from a viscoelastic Maxwell material into a Kelvin-Voigt material, which facilitates structural stabilization. A sign of this is the relaxation limit increase, prevention of continuous decay of an α-solid solution of iron and restoration of the lattice parameter.     

Microstructure,Phase Occurrence,and Corrosion Behavior of As-Solidified and As-Annealed Al-Pd Alloys

In the present work, we studied the microstructure, phase constitution, and corrosion performance of Al₈₈Pd₁₂, Al₇₇Pd₂₃, Al₇₂Pd₂₈, and Al₆₇Pd₃₃ alloys (metal concentrations are given in at.%). The alloys were prepared by repeated arc melting of Al and Pd granules in argon atmosphere. The as-solidified samples were further annealed at 700 °C for 500 h. The microstructure and phase constitution of the as-solidified and as-annealed alloys were studied by scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction. The alloys were found to consist of (Al), ε _n (~ Al₃Pd), and δ (Al₃Pd₂) in various fractions. The corrosion testing of the alloys was performed in aqueous NaCl (0.6 M) using a standard 3-electrode cell monitored by potentiostat. The corrosion current densities and corrosion potentials were determined by Tafel extrapolation. The corrosion potentials of the alloys were found between ? 763 and ? 841 mV versus Ag/AgCl. An active alloy dissolution has been observed, and it has been found that (Al) was excavated, whereas Al in ε _n was de-alloyed. The effects of bulk chemical composition, phase occurrence and microstructure on the corrosion behavior are evaluated. The local nobilities of ε _n and δ are discussed. Finally, the conclusions about the alloy’s corrosion resistance in saline solutions are provided.     

Writing and Functionalisation of Suspended DNA Nanowires on Superhydrophobic Pillar Arrays

Nanowire arrays and networks with precisely controlled patterns are very interesting for innovative device concepts in mesoscopic physics. In particular, DNA templates have proven to be versatile for the fabrication of complex structures that obtained functionality via combinations with other materials, for example by functionalisation with molecules or nanoparticles, or by coating with metals. Here, the controlled motion of the a three‐phase contact line (TCL) of DNA‐loaded drops on superhydrophobic substrates is used to fabricate suspended nanowire arrays. In particular, the deposition of DNA wires is imaged in situ, and different patterns are obtained on hexagonal pillar arrays by controlling the TCL velocity and direction. Robust conductive wires and networks are achieved by coating the wires with a thin layer of gold, and as proof of concept conductivity measurements are performed on single suspended wires. The plastic material of the superhydrophobic pillars ensures electrical isolation from the substrate. The more general versatility of these suspended nanowire networks as functional templates is outlined by fabricating hybrid organic–metal–semiconductor nanowires by growing ZnO nanocrystals onto the metal‐coated nanowires.     

The effect of microstructure on hydrogen permeability of high strength steels

Hydrogen diffusivity and trapping have been studied in two advanced high strength steel grades and model samples using electrochemical permeation test. Microstructures of CP1000 and DP1000 steels consist of ferrite, martensite and a small fraction of retained austenite. In addition, bainite is present in CP1000. Model phases with predominance of a particular phase have been prepared by specific heat treatment. DP1000 has shown the lowest diffusivity among all materials, while ferritic model sample has shown the highest. Differences in hydrogen diffusion coefficient values are linked to trapping microstructural characteristics and grain size.     

Identification of characteristics of a functionally graded isotropic cylinder

On the basis of the general problem formulation for an inhomogeneous isotropic body, the problems of steady-state longitudinal-radial and torsional vibrations of a cylinder are considered. The Lamé parameters and the density are variable in radial coordinate. The inverse coefficient problem on determining the laws of variation of cylinder’s properties from the data on the amplitude–frequency characteristics specified at different frequency ranges is studied. The numerical solution is constructed by using a three-stage iterative process based on the derived systems of the Fredholm integral equations of the first kind with smooth kernels with respect to the unknown corrections; the A.N. Tikhonov regularization method is employed to solve these equations. The reconstruction examples for monotonic laws are presented.